Contact Us

Phone:

(02) 9436 3500

 

Mobile:

0412 049 114

 

Fax:

(02) 9437 0890

 

Email:

dsaconsulting@dsaconsulting.com.au

 

Address:

Suite 10, 82-86 Pacific Highway

St Leonards NSW 2065

Online Enquiry

Please call me back
* Required fields
2 BURBANK PLACE, BAULKHAM HILLS

Project Description

Review of the building air conditioning consumption at 2 Burbank Place, Baulkham Hills.

 

Project Details

Client: Capital Corporation

Location: Baulkham Hills, NSW

Status: Completed 2019

62 NORWEST BOULEVARD, NORWEST

Project Description

Annual BEEC and NABERS review of the Mechanical services at 62 Norwest Boulevard, Norwest.

 

Project Details

Client: Capital Corporation

Location: Norwest, NSW

Status: Current (Annual)

8 SOLENT CIRCUIT, BAULKHAM HILLS

Project Description

Full design of the Mechanical and Electrical services at 8 Solent Circuit, Baulkham Hills. This will involve an uplift and redevelopment to accommodate two 10-storey office buildings, above ground and basement parking, and a ground-level café and lobby. This project is currently underway and consists of four stages - brief/concept design, development application/design development, procurement and construction.

 

Project Details

Client: Touchstone Partners

Location: Baulkham Hills

Status: Current

BIOTRONIK - 20 BRIDGE ST, PYMBLE

Project Description

Peer review of the Mechanical services for Biotronik Australia.

 

Project Details

Client: Axiom Fitout Group Unit Trust / Yuhu Group

Location: Pymble, NSW

Status: Completed 2019

4 BURBANK PLACE, NORWEST - GECO GAMING FITOUT

Project Description

Review of the Mechanical services for the GECO Gaming tenancy fitout located at L1, 4 Burbank Place, Norwest.

 

Project Details

Client: Nickaz Commercial Interiors

Location: Norwest, NSW

Status: Completed 2018

GORDON TOWN CENTRE

Project Description

Due diligence review and report of the Mechanical services at Gordon Town Centre.

 

Project Details

Client: Ganellen

Location: Gordon, NSW

Status: Completed 2020

287 MILITARY ROAD, CREMORNE

Project Description

Investigation, review and report of the car park ventilation installed at 287 Military Road, Cremorne.

 

Project Details

Client: Bright & Duggan

Location: Cremorne, NSW

Status: Completed 2018

21-23 LEXINGTON DRIVE, BELLA VISTA

Project Description

Full design of the Mechanical services at 21-23 Lexington Drive, Bella Vista in addition to Section J, JV3 and NABERS modelling. This is a $91 million project covering 28,000 m2 of land, incorporating commercial office serviced apartments and retail tenancies.

 

Project Details

Client: Capital Bluestone

Location: Bella Vista, NSW

Status: Current

12 SHELLEY STREET, SYDNEY - AMEX

Project Description

Full design of the Mechanical, Electrical, Hydraulic and Fire services for the redevelopment of the AMEX fitout at 12 Shelley Street, Sydney. This is an 11-storey A-grade commercial office building.

 

Project Details

Client: American Express International Inc.

Location: Sydney, NSW

Status: Completed 2020

2-4 PACIFIC HIGHWAY, ST LEONARDS

Project Description

Review and report of the proposal for the conversion of the existing water-cooled air conditioning system to an air-cooled system at 2-4 Pacific Highway, St Leonards.

 

Project Details

Client: Knight Frank Australia

Location: St Leonards, NSW

Status: Completed 2020

THE CHAMBERS - 370 PITT STREET, SYDNEY

Project Description

Design and construct for the Mechanical services relating to the chiller upgrade at 370 Pitt Street, Sydney. This involved three stages - a site inspection and report, tender documentation, selection options and construction services.

 

Project Details

Client: Strata Plan 46628

Location: Sydney, NSW

Status: Completed 2018

LIVERPOOL MAZDA

Project Description

Full design of the Mechanical services for the redevelopment of Liverpool Mazda, including schematic design, documentation and construction services. The project entailed the development of a new showroom, service centre and basement car park.

 

Project Details

Client: Automotive Holdings Group

Location: Liverpool, NSW

Status: Completed 2019

PYMBLE CORPORATE CENTRE

Project Description

Project management and full design and documentation of the Mechanical services for Pymble Corporate Centre. This involved two three-storey towers and one four-store tower across 14,459 m2 and the accommodation of 1017 car park spaces. This included replacement of the air conditioning with 'like for like' water cooled package units, replacement of the existing diffusers with swirl diffusers and an option for the replacement of the controls with a BMCS.

 

Project Details

Client: Overland Corporation

Location: Pymble, NSW

Status: Completed 2018

2 BURBANK PLACE, NORWEST - SUITE 6.02 VALVOLINE FITOUT

Project Description

Review and resolution of the Mechanical services for the Valvoline Fitout, including schematic design, report, scope of works and construction administration.

 

Project Details

Client: Capital Corporation

Location: Norwest, NSW

Status: Current 

66 CLARENCE STREET, SYDNEY

LEVEL 1 MAKE-GOOD & AMENITIES REFURBISHMENT

Full design of the Mechanical services for the make-good and amenities refurbishment, including scope of reinstatement works, upgrade works, drawings, site inspections and quality audits.

 

CHILLER UPGRADE

Design and documentation for the chiller upgrade, including tender documentation and construction services.

 

Project Details

Client: Property & Asset Management / Tanert & JLL

Location: Sydney, NSW

Status: Completed 2019

2 SOLENT CIRCUIT, BAULKHAM HILLS

Project Description

Review and report relating to the proposed replacement of the air conditioning system at 2 Solent Circuit, Baulkham Hills.

 

Project Details

Client: Capital Corporation

Location: Baulkham Hills, NSW

Status: Completed 2018

61 YORK STREET, SYDNEY

Project Description

NABERS assessment and report for 61 York Street, Sydney.

 

Project Details

Client: Sydney Property

Location: Sydney, NSW

Status: Completed 2017

ST JAMES CENTRE - 111 ELIZABETH STREET, SYDNEY

FIRE & SMOKE UPGRADE (2019-2020)

Full design of the Mechanical services for the upgrade of the Fire and Smoke system. This includes detailed design and documentation, construction services and commissioning.

 

BMCS UPGRADE (2017-2019)

Review of the existing BMCS and production of a specification and drawings for the BMCS upgrade, including tender documentation and construction services.

 

Project Details

Client: Tanert via Sassifire / Tanert & JLL

Location: Sydney, NSW

Status: Completed

122 ARTHUR STREET, NORTH SYDNEY

Project Description

Full design, documentation and report for the air conditioning upgrade at 122 Arthur Street, North Sydney. This project was finalised in 2020 and included the delivery of a report on the Mechanical services on the premises.

 

Project Details

Client: Dunns' Strata

Location: North Sydney, NSW

Status: Completed 2020

44 BILOELA AVENUE, VILLAWOOD

Project Description

Report on the air conditioning and exhaust services at 44 Biloela Avenue, Villawood.

 

Project Details

Client: Savills Australia

Location: Villawood, NSW

Status: Completed 2016

BLIGH CHAMBERS - 25 BLIGH STREET, SYDNEY

Project Description

Review of the stair pressurisation plant in relation to obtaining and maintaining annual compliance at 25 Bligh Street, Sydney.

 

Project Details

Client: Kingsmede

Location: Sydney, NSW

Status: Completed 2018

BAIADA POULTRY HEAD OFFICE

Project Description

Design and construct - including heat load calculations - for the Mechanical services at the Baiada Poultry Head Office.

 

Project Details

Client: Flux Air

Location: Pendle Hill, NSW

Status: Completed 2017

IMPERIAL TOBACCO

Project Description

Full design of the Mechanical services for the refurbishment of the Imperial Tobacco fitout at 4-8 Inglewood Place, Baulkham Hills. This included schematic design, tender documentation and construction services.

 

Project Details

Client: Axiom Projects

Location: Baulkham Hills, NSW

Status: Completed 2017

AUSTRALIAN UNITY - CAMPBELLTOWN

Project Description

Review of the Mechanical services at Australian Unity (Campbelltown) to advise on the existing diffusers layout in relation to the proposed fitout.

 

Project Details

Client: GreaterGroup

Location: Campbelltown, NSW

Status: Completed 2016